How-To :: obbrowser no Slackware


Diferentemente do artigo sobre a instalação do obmenu-generator no Slackware, aqui veremos como instalar os módulos necessários para o funcionamento do obbrowser via CPAN.

Motivos

Os motivos que me levaram a seguir a maneira tradicional foram que para o obbrowser funcionar temos que instalar os seguintes módulos CPAN:

File::BaseDir
File::DesktopEntry
File::MimeInfo

Comecei a empacotar todas as dependências para esse programa no Slackware, pacotes que aqui chamei de:

perl-file-basedir;
perl-file-desktopentry;
perl-file-mimeinfo; e
perl-extutils-makemaker.

Dependências

O pacote perl-extutils-makemaker não possui dependência para sua instalação, portanto consegui empacotá-lo, porém não sei se o enviarei ao SlackBuilds porque por hora ele não tem utilidade para mim.

O pacote perl-file-basedir é o mais importante dos que cite, pois ele depende de uma série de pacotes do SlackBuilds: ( perl-IPC-System-Simple perl-File-Which perl-Module-Build-Tiny ), e tem seu empacotamento empacado devido a versão do Module::Build::Tiny.

O pacote perl-file-desktopentry depende dos dois pacotes já falados: perl-file-basedir e perl-extutils-makemaker.

E por último o pacote que juntamente com o SlackBuild que criei é que fazem o obbrowser funcionar, o perl-file-mimeinfo que depende dos seguintes pacotes para seu empacotamento: perl-extutils-makemaker, perl-file-basedir e perl-file-desktopentry.

Curiosamente ao usar a maneira tradicional, ou seja, usar o CPAN, consegui empacotar não só o perl-file-basedir como todos os demais que dele dependiam, porém ele não será aceito no SlackBuild, até que o autor do pacote Module::Build::Tiny atualize o seu!, vejam:

perl-file-basedir:

+-[slackware][~/Downloads/perl-file-basedir]
+-? sudo sh perl-file-basedir.SlackBuild 
File-BaseDir-0.06
File-BaseDir-0.06/Build.PL
File-BaseDir-0.06/Changes
File-BaseDir-0.06/configure
File-BaseDir-0.06/Makefile.PL
File-BaseDir-0.06/MANIFEST
File-BaseDir-0.06/META.json
File-BaseDir-0.06/META.yml
File-BaseDir-0.06/README
File-BaseDir-0.06/lib
File-BaseDir-0.06/lib/File
File-BaseDir-0.06/lib/File/BaseDir.pm
File-BaseDir-0.06/lib/File/IconTheme.pm
File-BaseDir-0.06/lib/File/UserDirs.pm
File-BaseDir-0.06/t
File-BaseDir-0.06/t/01_vars.t
File-BaseDir-0.06/t/02_lookup.t
File-BaseDir-0.06/t/03_icontheme.t
File-BaseDir-0.06/t/03_OO.t
File-BaseDir-0.06/t/03_userdirs.t
File-BaseDir-0.06/t/04_pod_ok.t
File-BaseDir-0.06/t/05_pod_cover.t
# Converted to config installvendorman3dir=/usr/man/man3
# running Build.PL --prefix /usr --installdirs vendor --config installvendorman3dir=/usr/man/man3
Created MYMETA.yml and MYMETA.json
Creating new 'Build' script for 'File-BaseDir' version '0.06'
/usr/bin/perl5.18.1 Build --makefile_env_macros 1
Building File-BaseDir
/usr/bin/perl5.18.1 Build --makefile_env_macros 1 test
t/01_vars.t ....... ok     
t/02_lookup.t ..... ok     
t/03_OO.t ......... ok   
t/03_icontheme.t .. ok   
t/03_userdirs.t ... ok   
t/04_pod_ok.t ..... skipped: Test::Pod 1.00 required for testing POD
t/05_pod_cover.t .. skipped: Test::Pod::Coverage 1.00 required for testing POD coverage
All tests successful.
Files=7, Tests=44,  1 wallclock secs ( 0.07 usr  0.01 sys +  0.50 cusr  0.07 csys =  0.65 CPU)
Result: PASS
/usr/bin/perl5.18.1 Build --makefile_env_macros 1 install
Building File-BaseDir
Installing /tmp/SBo/package-perl-file-basedir/usr/share/perl5/vendor_perl/File/BaseDir.pm
Installing /tmp/SBo/package-perl-file-basedir/usr/share/perl5/vendor_perl/File/IconTheme.pm
Installing /tmp/SBo/package-perl-file-basedir/usr/share/perl5/vendor_perl/File/UserDirs.pm
Installing /tmp/SBo/package-perl-file-basedir/usr/man/man3/File::BaseDir.3
Installing /tmp/SBo/package-perl-file-basedir/usr/man/man3/File::UserDirs.3
Installing /tmp/SBo/package-perl-file-basedir/usr/man/man3/File::IconTheme.3

Slackware package maker, version 3.14159.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /tmp/perl-file-basedir-0.06-i486-1_SBo.tgz

./
install/
install/slack-desc
usr/
usr/doc/
usr/doc/perl-file-basedir-0.06/
usr/doc/perl-file-basedir-0.06/perl-file-basedir.SlackBuild
usr/doc/perl-file-basedir-0.06/Changes
usr/doc/perl-file-basedir-0.06/README
usr/man/
usr/man/man3/
usr/man/man3/File::UserDirs.3.gz
usr/man/man3/File::IconTheme.3.gz
usr/man/man3/File::BaseDir.3.gz
usr/share/
usr/share/perl5/
usr/share/perl5/vendor_perl/
usr/share/perl5/vendor_perl/File/
usr/share/perl5/vendor_perl/File/BaseDir.pm
usr/share/perl5/vendor_perl/File/IconTheme.pm
usr/share/perl5/vendor_perl/File/UserDirs.pm

Slackware package /tmp/perl-file-basedir-0.06-i486-1_SBo.tgz created.

+-[slackware][~/Downloads/perl-file-basedir]
+-? sudo installpkg /tmp/perl-file-basedir-0.06-i486-1_SBo.tgz
Verifying package perl-file-basedir-0.06-i486-1_SBo.tgz.
Installing package perl-file-basedir-0.06-i486-1_SBo.tgz:
PACKAGE DESCRIPTION:
# perl-file-basedir (File::BaseDir - Use the Freedesktop.org base directory specification)
#
# This module can be used to find directories and files as specified by 
# 
# the Freedesktop.org Base Directory Specification.
#
Package perl-file-basedir-0.06-i486-1_SBo.tgz installed.

+-[slackware][~/Downloads/perl-file-basedir]
+-? 

perl-file-desktopentry:

+-[slackware][~/Downloads/perl-file-desktopentry]
+-? sudo sh perl-file-desktopentry.SlackBuild 
File-DesktopEntry-0.08/
File-DesktopEntry-0.08/README
File-DesktopEntry-0.08/t/
File-DesktopEntry-0.08/t/02_DesktopEntry.t
File-DesktopEntry-0.08/t/06_changes.t
File-DesktopEntry-0.08/t/03_run.t
File-DesktopEntry-0.08/t/applications/
File-DesktopEntry-0.08/t/applications/foo.desktop
File-DesktopEntry-0.08/t/01_data.t
File-DesktopEntry-0.08/t/05_pod_cover.t
File-DesktopEntry-0.08/t/04_pod_ok.t
File-DesktopEntry-0.08/Makefile.PL
File-DesktopEntry-0.08/lib/
File-DesktopEntry-0.08/lib/File/
File-DesktopEntry-0.08/lib/File/DesktopEntry.pm
File-DesktopEntry-0.08/Changes
File-DesktopEntry-0.08/META.json
File-DesktopEntry-0.08/MANIFEST
File-DesktopEntry-0.08/META.yml
Checking if your kit is complete...
Looks good
Writing Makefile for File::DesktopEntry
Writing MYMETA.yml and MYMETA.json
cp lib/File/DesktopEntry.pm blib/lib/File/DesktopEntry.pm
Manifying blib/man3/File::DesktopEntry.3
PERL_DL_NONLAZY=1 /usr/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_data.t .......... ok     
t/02_DesktopEntry.t .. ok     
t/03_run.t ........... ok   
t/04_pod_ok.t ........ skipped: Test::Pod 1.00 required for testing POD
t/05_pod_cover.t ..... skipped: Test::Pod::Coverage 1.00 required for testing POD coverage
t/06_changes.t ....... skipped: Test::CPAN::Changes required for this test
All tests successful.
Files=6, Tests=59,  1 wallclock secs ( 0.08 usr  0.01 sys +  0.49 cusr  0.05 csys =  0.63 CPU)
Result: PASS
Installing /tmp/SBo/package-perl-file-desktopentry/usr/share/perl5/vendor_perl/File/DesktopEntry.pm
Installing /tmp/SBo/package-perl-file-desktopentry/usr/man/man3/File::DesktopEntry.3
Appending installation info to /tmp/SBo/package-perl-file-desktopentry/usr/lib/perl5/perllocal.pod

Slackware package maker, version 3.14159.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /tmp/perl-file-desktopentry-0.08-i486-1_SBo.tgz

./
install/
install/slack-desc
usr/
usr/doc/
usr/doc/perl-file-desktopentry-0.08/
usr/doc/perl-file-desktopentry-0.08/Changes
usr/doc/perl-file-desktopentry-0.08/README
usr/doc/perl-file-desktopentry-0.08/perl-file-desktopentry.SlackBuild
usr/man/
usr/man/man3/
usr/man/man3/File::DesktopEntry.3.gz
usr/share/
usr/share/perl5/
usr/share/perl5/vendor_perl/
usr/share/perl5/vendor_perl/File/
usr/share/perl5/vendor_perl/File/DesktopEntry.pm

Slackware package /tmp/perl-file-desktopentry-0.08-i486-1_SBo.tgz created.

+-[slackware][~/Downloads/perl-file-desktopentry]
+-? sudo installpkg /tmp/perl-file-desktopentry-0.08-i486-1_SBo.tgz
Verifying package perl-file-desktopentry-0.08-i486-1_SBo.tgz.
Installing package perl-file-desktopentry-0.08-i486-1_SBo.tgz:
PACKAGE DESCRIPTION:
# perl-file-desktopentry (File::DesktopEntry - Object to handle .desktop files)
#
# This module is used to work with .desktop files. The format of these files 
# 
# is specified by the freedesktop "Desktop Entry" specification.
#
Package perl-file-desktopentry-0.08-i486-1_SBo.tgz installed.

+-[slackware][~/Downloads/perl-file-desktopentry]
+-? 

perl-file-mimeinfo:

+-[slackware][~/Downloads/perl-file-mimeinfo]
+-? sudo sh perl-file-mimeinfo.SlackBuild 
File-MimeInfo-0.27/
File-MimeInfo-0.27/t/
File-MimeInfo-0.27/t/mime/
File-MimeInfo-0.27/t/mime/text/
File-MimeInfo-0.27/t/mime/text/plain.xml
File-MimeInfo-0.27/t/mime/subclasses
File-MimeInfo-0.27/t/mime/aliases
File-MimeInfo-0.27/t/mime/magic
File-MimeInfo-0.27/t/mime/globs
File-MimeInfo-0.27/t/text_plain_czech
File-MimeInfo-0.27/t/default/
File-MimeInfo-0.27/t/default/encoding_breakage
File-MimeInfo-0.27/t/default/plain_text
File-MimeInfo-0.27/t/default/utf8_text
File-MimeInfo-0.27/t/default/binary_file
File-MimeInfo-0.27/t/default/empty_file
File-MimeInfo-0.27/t/magic/
File-MimeInfo-0.27/t/magic/text_plain
File-MimeInfo-0.27/t/magic/application_msword
File-MimeInfo-0.27/t/magic/application_octet-stream
File-MimeInfo-0.27/t/magic/text_x-patch
File-MimeInfo-0.27/t/magic/application_x-executable
File-MimeInfo-0.27/t/magic/application_vnd.corel-draw
File-MimeInfo-0.27/t/magic/application_x-perl.txt
File-MimeInfo-0.27/t/magic/application_x-perl
File-MimeInfo-0.27/t/01_normal.t
File-MimeInfo-0.27/t/applications/
File-MimeInfo-0.27/t/applications/mimeinfo.cache
File-MimeInfo-0.27/t/applications/mirage.desktop
File-MimeInfo-0.27/t/applications/foo.desktop
File-MimeInfo-0.27/t/02_magic.t
File-MimeInfo-0.27/t/06_pod_ok.t
File-MimeInfo-0.27/t/08_changes.t
File-MimeInfo-0.27/t/04_IO_objects.t
File-MimeInfo-0.27/t/09_no404s.t
File-MimeInfo-0.27/t/03_rox.t
File-MimeInfo-0.27/t/00_use_ok.t
File-MimeInfo-0.27/t/07_pod_cover.t
File-MimeInfo-0.27/t/05_more.t
File-MimeInfo-0.27/MANIFEST
File-MimeInfo-0.27/.travis.yml
File-MimeInfo-0.27/mimetype
File-MimeInfo-0.27/mimeopen
File-MimeInfo-0.27/Makefile.PL
File-MimeInfo-0.27/lib/
File-MimeInfo-0.27/lib/File/
File-MimeInfo-0.27/lib/File/MimeInfo/
File-MimeInfo-0.27/lib/File/MimeInfo/Magic.pm
File-MimeInfo-0.27/lib/File/MimeInfo/Cookbook.pod
File-MimeInfo-0.27/lib/File/MimeInfo/Rox.pm
File-MimeInfo-0.27/lib/File/MimeInfo/Applications.pm
File-MimeInfo-0.27/lib/File/MimeInfo.pm
File-MimeInfo-0.27/README.md
File-MimeInfo-0.27/Changes
File-MimeInfo-0.27/META.yml
File-MimeInfo-0.27/META.json
Checking if your kit is complete...
Looks good
Writing Makefile for File::MimeInfo
Writing MYMETA.yml and MYMETA.json
“README.md” -> “README”
cp lib/File/MimeInfo/Applications.pm blib/lib/File/MimeInfo/Applications.pm
cp lib/File/MimeInfo/Magic.pm blib/lib/File/MimeInfo/Magic.pm
cp lib/File/MimeInfo.pm blib/lib/File/MimeInfo.pm
cp lib/File/MimeInfo/Rox.pm blib/lib/File/MimeInfo/Rox.pm
cp lib/File/MimeInfo/Cookbook.pod blib/lib/File/MimeInfo/Cookbook.pod
cp mimeopen blib/script/mimeopen
/usr/bin/perl5.18.1 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/mimeopen
cp mimetype blib/script/mimetype
/usr/bin/perl5.18.1 -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/mimetype
Manifying blib/man1/mimeopen.1
Manifying blib/man1/mimetype.1
Manifying blib/man3/File::MimeInfo::Rox.3
Manifying blib/man3/File::MimeInfo::Applications.3
Manifying blib/man3/File::MimeInfo::Cookbook.3
Manifying blib/man3/File::MimeInfo::Magic.3
Manifying blib/man3/File::MimeInfo.3
PERL_DL_NONLAZY=1 /usr/bin/perl5.18.1 "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_use_ok.t ...... ok   
t/01_normal.t ...... ok     
t/02_magic.t ....... ok     
t/03_rox.t ......... ok   
t/04_IO_objects.t .. ok   
t/05_more.t ........ ok     
t/06_pod_ok.t ...... skipped: Test::Pod 1.00 required for testing POD
t/07_pod_cover.t ... skipped: Test::Pod::Coverage 1.00 required for testing POD coverage
t/08_changes.t ..... skipped: Test::CPAN::Changes 0.18 or later required for this test
t/09_no404s.t ...... skipped: Skip $ENV{EXTENDED_TESTING} is not set
All tests successful.
Files=10, Tests=76,  1 wallclock secs ( 0.09 usr  0.02 sys +  0.62 cusr  0.07 csys =  0.80 CPU)
Result: PASS
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/perl5/vendor_perl/File/MimeInfo.pm
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/perl5/vendor_perl/File/MimeInfo/Rox.pm
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/perl5/vendor_perl/File/MimeInfo/Magic.pm
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/perl5/vendor_perl/File/MimeInfo/Applications.pm
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/perl5/vendor_perl/File/MimeInfo/Cookbook.pod
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/man/man1/mimeopen.1
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/share/man/man1/mimetype.1
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/man/man3/File::MimeInfo::Cookbook.3
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/man/man3/File::MimeInfo::Magic.3
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/man/man3/File::MimeInfo::Rox.3
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/man/man3/File::MimeInfo.3
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/man/man3/File::MimeInfo::Applications.3
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/bin/mimeopen
Installing /tmp/SBo/package-perl-file-mimeinfo/usr/bin/mimetype
Appending installation info to /tmp/SBo/package-perl-file-mimeinfo/usr/lib/perl5/perllocal.pod

Slackware package maker, version 3.14159.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /tmp/perl-file-mimeinfo-0.27-i486-1_SBo.tgz

./
install/
install/slack-desc
usr/
usr/doc/
usr/doc/perl-file-mimeinfo-0.27/
usr/doc/perl-file-mimeinfo-0.27/Changes
usr/doc/perl-file-mimeinfo-0.27/README
usr/doc/perl-file-mimeinfo-0.27/perl-file-mimeinfo.SlackBuild
usr/man/
usr/man/man3/
usr/man/man3/File::MimeInfo::Rox.3.gz
usr/man/man3/File::MimeInfo::Applications.3.gz
usr/man/man3/File::MimeInfo::Magic.3.gz
usr/man/man3/File::MimeInfo.3.gz
usr/man/man3/File::MimeInfo::Cookbook.3.gz
usr/share/
usr/share/perl5/
usr/share/perl5/vendor_perl/
usr/share/perl5/vendor_perl/File/
usr/share/perl5/vendor_perl/File/MimeInfo/
usr/share/perl5/vendor_perl/File/MimeInfo/Rox.pm
usr/share/perl5/vendor_perl/File/MimeInfo/Magic.pm
usr/share/perl5/vendor_perl/File/MimeInfo/Applications.pm
usr/share/perl5/vendor_perl/File/MimeInfo/Cookbook.pod
usr/share/perl5/vendor_perl/File/MimeInfo.pm
usr/share/man/
usr/share/man/man1/
usr/share/man/man1/mimeopen.1
usr/share/man/man1/mimetype.1
usr/bin/
usr/bin/mimeopen
usr/bin/mimetype
WARNING:  /usr/share/man (with possibly not gzipped man pages) detected

Slackware package /tmp/perl-file-mimeinfo-0.27-i486-1_SBo.tgz created.

+-[slackware][~/Downloads/perl-file-mimeinfo]
+-? sudo installpkg /tmp/perl-file-mimeinfo-0.27-i486-1_SBo.tgz
Verifying package perl-file-mimeinfo-0.27-i486-1_SBo.tgz.
Installing package perl-file-mimeinfo-0.27-i486-1_SBo.tgz:
PACKAGE DESCRIPTION:
# perl-file-mimeinfo (File::MimeInfo - Determine file type)
#
# This module can be used to determine the mime type of a file.
# 
# It tries to implement the freedesktop specification for a shared MIME database.
#
Package perl-file-mimeinfo-0.27-i486-1_SBo.tgz installed.

+-[slackware][~/Downloads/perl-file-mimeinfo]
+-? 

perl-extutils-makemaker:

+-[slackware][~/Downloads/perl-extutils-makemaker]
+-? sudo sh perl-extutils-makemaker.SlackBuild 
ExtUtils-MakeMaker-7.04/
ExtUtils-MakeMaker-7.04/my/
ExtUtils-MakeMaker-7.04/my/bundles.pm
ExtUtils-MakeMaker-7.04/bin/
ExtUtils-MakeMaker-7.04/bin/instmodsh
ExtUtils-MakeMaker-7.04/bundled/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Command/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Command/ExtUtils/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Command/ExtUtils/Command.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/Prereqs.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/Spec.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/Converter.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/Validator.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/Feature.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta/CPAN/Meta/History.pm
ExtUtils-MakeMaker-7.04/bundled/JSON-PP-Compat5006/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP-Compat5006/JSON/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP-Compat5006/JSON/PP/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP-Compat5006/JSON/PP/Compat5006.pm
ExtUtils-MakeMaker-7.04/bundled/Parse-CPAN-Meta/
ExtUtils-MakeMaker-7.04/bundled/Parse-CPAN-Meta/Parse/
ExtUtils-MakeMaker-7.04/bundled/Parse-CPAN-Meta/Parse/CPAN/
ExtUtils-MakeMaker-7.04/bundled/Parse-CPAN-Meta/Parse/CPAN/Meta.pm
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-YAML/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-YAML/CPAN/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-YAML/CPAN/Meta/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-YAML/CPAN/Meta/YAML.pm
ExtUtils-MakeMaker-7.04/bundled/File-Temp/
ExtUtils-MakeMaker-7.04/bundled/File-Temp/File/
ExtUtils-MakeMaker-7.04/bundled/File-Temp/File/Temp.pm
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Manifest/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Manifest/ExtUtils/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Manifest/ExtUtils/Manifest.pm
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Manifest/ExtUtils/MANIFEST.SKIP
ExtUtils-MakeMaker-7.04/bundled/JSON-PP/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP/JSON/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP/JSON/PP.pm
ExtUtils-MakeMaker-7.04/bundled/JSON-PP/JSON/PP/
ExtUtils-MakeMaker-7.04/bundled/JSON-PP/JSON/PP/Boolean.pm
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Install/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Install/ExtUtils/
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Install/ExtUtils/Install.pm
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Install/ExtUtils/Packlist.pm
ExtUtils-MakeMaker-7.04/bundled/ExtUtils-Install/ExtUtils/Installed.pm
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/Scalar/
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/Scalar/Util.pm
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/Scalar/Util/
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/Scalar/Util/PP.pm
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/List/
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/List/Util.pm
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/List/Util/
ExtUtils-MakeMaker-7.04/bundled/Scalar-List-Utils/List/Util/PP.pm
ExtUtils-MakeMaker-7.04/bundled/README
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-Requirements/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-Requirements/CPAN/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-Requirements/CPAN/Meta/
ExtUtils-MakeMaker-7.04/bundled/CPAN-Meta-Requirements/CPAN/Meta/Requirements.pm
ExtUtils-MakeMaker-7.04/META.json
ExtUtils-MakeMaker-7.04/README.packaging
ExtUtils-MakeMaker-7.04/MANIFEST
ExtUtils-MakeMaker-7.04/.perlcriticrc
ExtUtils-MakeMaker-7.04/t/
ExtUtils-MakeMaker-7.04/t/unicode.t
ExtUtils-MakeMaker-7.04/t/fix_libs.t
ExtUtils-MakeMaker-7.04/t/META_for_testing.yml
ExtUtils-MakeMaker-7.04/t/miniperl.t
ExtUtils-MakeMaker-7.04/t/testdata/
ExtUtils-MakeMaker-7.04/t/testdata/reallylongdirectoryname/
ExtUtils-MakeMaker-7.04/t/testdata/reallylongdirectoryname/arch2/
ExtUtils-MakeMaker-7.04/t/testdata/reallylongdirectoryname/arch2/Config.pm
ExtUtils-MakeMaker-7.04/t/testdata/reallylongdirectoryname/arch1/
ExtUtils-MakeMaker-7.04/t/testdata/reallylongdirectoryname/arch1/Config.pm
ExtUtils-MakeMaker-7.04/t/installed_file.t
ExtUtils-MakeMaker-7.04/t/01perl_bugs.t
ExtUtils-MakeMaker-7.04/t/parse_abstract.t
ExtUtils-MakeMaker-7.04/t/testlib.t
ExtUtils-MakeMaker-7.04/t/test_boilerplate.t
ExtUtils-MakeMaker-7.04/t/metafile_data.t
ExtUtils-MakeMaker-7.04/t/Liblist.t
ExtUtils-MakeMaker-7.04/t/00compile.t
ExtUtils-MakeMaker-7.04/t/cd.t
ExtUtils-MakeMaker-7.04/t/pm.t
ExtUtils-MakeMaker-7.04/t/META_for_testing.json
ExtUtils-MakeMaker-7.04/t/basic.t
ExtUtils-MakeMaker-7.04/t/dir_target.t
ExtUtils-MakeMaker-7.04/t/MM_OS2.t
ExtUtils-MakeMaker-7.04/t/echo.t
ExtUtils-MakeMaker-7.04/t/MM_Unix.t
ExtUtils-MakeMaker-7.04/t/min_perl_version.t
ExtUtils-MakeMaker-7.04/t/metafile_file.t
ExtUtils-MakeMaker-7.04/t/parse_version.t
ExtUtils-MakeMaker-7.04/t/MM_Cygwin.t
ExtUtils-MakeMaker-7.04/t/problems.t
ExtUtils-MakeMaker-7.04/t/postamble.t
ExtUtils-MakeMaker-7.04/t/FIRST_MAKEFILE.t
ExtUtils-MakeMaker-7.04/t/MM_Any.t
ExtUtils-MakeMaker-7.04/t/Mkbootstrap.t
ExtUtils-MakeMaker-7.04/t/META_for_testing_tricky_version.yml
ExtUtils-MakeMaker-7.04/t/make.t
ExtUtils-MakeMaker-7.04/t/several_authors.t
ExtUtils-MakeMaker-7.04/t/prompt.t
ExtUtils-MakeMaker-7.04/t/fixin.t
ExtUtils-MakeMaker-7.04/t/backwards.t
ExtUtils-MakeMaker-7.04/t/prereq_print.t
ExtUtils-MakeMaker-7.04/t/MM_VMS.t
ExtUtils-MakeMaker-7.04/t/revision.t
ExtUtils-MakeMaker-7.04/t/split_command.t
ExtUtils-MakeMaker-7.04/t/is_of_type.t
ExtUtils-MakeMaker-7.04/t/prereq.t
ExtUtils-MakeMaker-7.04/t/INST_PREFIX.t
ExtUtils-MakeMaker-7.04/t/writemakefile_args.t
ExtUtils-MakeMaker-7.04/t/MM_NW5.t
ExtUtils-MakeMaker-7.04/t/pod2man.t
ExtUtils-MakeMaker-7.04/t/lib/
ExtUtils-MakeMaker-7.04/t/lib/Test/
ExtUtils-MakeMaker-7.04/t/lib/Test/Simple.pm
ExtUtils-MakeMaker-7.04/t/lib/Test/Builder/
ExtUtils-MakeMaker-7.04/t/lib/Test/Builder/Module.pm
ExtUtils-MakeMaker-7.04/t/lib/Test/Builder/IO/
ExtUtils-MakeMaker-7.04/t/lib/Test/Builder/IO/Scalar.pm
ExtUtils-MakeMaker-7.04/t/lib/Test/More.pm
ExtUtils-MakeMaker-7.04/t/lib/Test/Builder.pm
ExtUtils-MakeMaker-7.04/t/lib/TieOut.pm
ExtUtils-MakeMaker-7.04/t/lib/TieIn.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/NoXS.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/MPV.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/Problem.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/SAS.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/Unicode.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/Recurs.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/PL_FILES.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/XS.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Setup/BFD.pm
ExtUtils-MakeMaker-7.04/t/lib/MakeMaker/Test/Utils.pm
ExtUtils-MakeMaker-7.04/t/arch_check.t
ExtUtils-MakeMaker-7.04/t/INST.t
ExtUtils-MakeMaker-7.04/t/Liblist_Kid.t
ExtUtils-MakeMaker-7.04/t/pm_to_blib.t
ExtUtils-MakeMaker-7.04/t/maketext_filter.t
ExtUtils-MakeMaker-7.04/t/hints.t
ExtUtils-MakeMaker-7.04/t/config.t
ExtUtils-MakeMaker-7.04/t/recurs.t
ExtUtils-MakeMaker-7.04/t/prefixify.t
ExtUtils-MakeMaker-7.04/t/meta_convert.t
ExtUtils-MakeMaker-7.04/t/VERSION_FROM.t
ExtUtils-MakeMaker-7.04/t/MM_BeOS.t
ExtUtils-MakeMaker-7.04/t/MM_Win32.t
ExtUtils-MakeMaker-7.04/t/build_man.t
ExtUtils-MakeMaker-7.04/t/WriteEmptyMakefile.t
ExtUtils-MakeMaker-7.04/t/MakeMaker_Parameters.t
ExtUtils-MakeMaker-7.04/t/vstrings.t
ExtUtils-MakeMaker-7.04/t/xs.t
ExtUtils-MakeMaker-7.04/t/PL_FILES.t
ExtUtils-MakeMaker-7.04/t/INSTALL_BASE.t
ExtUtils-MakeMaker-7.04/t/oneliner.t
ExtUtils-MakeMaker-7.04/t/liblist/
ExtUtils-MakeMaker-7.04/t/liblist/win32/
ExtUtils-MakeMaker-7.04/t/liblist/win32/test2.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib_test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/dir/
ExtUtils-MakeMaker-7.04/t/liblist/win32/dir/dir_test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/pl.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/test.meep
ExtUtils-MakeMaker-7.04/t/liblist/win32/test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/__test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/vc/
ExtUtils-MakeMaker-7.04/t/liblist/win32/vc/vctest.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/di r/
ExtUtils-MakeMaker-7.04/t/liblist/win32/di r/dir_test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/imp.dll.a
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib__test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib/
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib/CORE/
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib/CORE/c_test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/lib/CORE/double.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/space lib.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/libpath/
ExtUtils-MakeMaker-7.04/t/liblist/win32/libpath/lp_test.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/test.a.lib
ExtUtils-MakeMaker-7.04/t/liblist/win32/double.lib
ExtUtils-MakeMaker-7.04/INSTALL
ExtUtils-MakeMaker-7.04/Changes
ExtUtils-MakeMaker-7.04/MANIFEST.SKIP
ExtUtils-MakeMaker-7.04/CONTRIBUTING
ExtUtils-MakeMaker-7.04/NOTES
ExtUtils-MakeMaker-7.04/lib/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Command/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Command/MM.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Win95.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Mkbootstrap.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_DOS.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_VOS.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Liblist/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Liblist/Kid.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_VMS.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Mksymlists.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_OS2.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MY.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_UWIN.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_NW5.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/Liblist.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Win32.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/Config.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/version.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/version/
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/version/regex.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/version/vpp.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/FAQ.pod
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/Tutorial.pod
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MakeMaker/Locale.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_BeOS.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_QNX.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Unix.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Any.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_MacOS.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/testlib.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Darwin.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_AIX.pm
ExtUtils-MakeMaker-7.04/lib/ExtUtils/MM_Cygwin.pm
ExtUtils-MakeMaker-7.04/README
ExtUtils-MakeMaker-7.04/META.yml
ExtUtils-MakeMaker-7.04/Makefile.PL
Using included version of CPAN::Meta::Requirements (2.127) as it is newer than the installed version (2.122).
Using included version of ExtUtils::Manifest (1.65) as it is newer than the installed version (1.63).
Using included version of JSON::PP (2.27203) as it is newer than the installed version (2.27202).
Checking if your kit is complete...
Looks good
Generating a Unix-style Makefile
Writing Makefile for ExtUtils::MakeMaker
Writing MYMETA.yml and MYMETA.json
cp lib/ExtUtils/MM_Win95.pm blib/lib/ExtUtils/MM_Win95.pm
cp lib/ExtUtils/Liblist/Kid.pm blib/lib/ExtUtils/Liblist/Kid.pm
cp lib/ExtUtils/MM_Darwin.pm blib/lib/ExtUtils/MM_Darwin.pm
cp lib/ExtUtils/MM_AIX.pm blib/lib/ExtUtils/MM_AIX.pm
cp lib/ExtUtils/MM_DOS.pm blib/lib/ExtUtils/MM_DOS.pm
cp lib/ExtUtils/Liblist.pm blib/lib/ExtUtils/Liblist.pm
cp lib/ExtUtils/MM_Win32.pm blib/lib/ExtUtils/MM_Win32.pm
cp lib/ExtUtils/MakeMaker.pm blib/lib/ExtUtils/MakeMaker.pm
cp lib/ExtUtils/MM_OS2.pm blib/lib/ExtUtils/MM_OS2.pm
cp lib/ExtUtils/MakeMaker/version.pm blib/lib/ExtUtils/MakeMaker/version.pm
cp lib/ExtUtils/MY.pm blib/lib/ExtUtils/MY.pm
cp inc/JSON/PP.pm blib/lib/JSON/PP.pm
cp lib/ExtUtils/MM_BeOS.pm blib/lib/ExtUtils/MM_BeOS.pm
cp lib/ExtUtils/Command/MM.pm blib/lib/ExtUtils/Command/MM.pm
cp lib/ExtUtils/Mksymlists.pm blib/lib/ExtUtils/Mksymlists.pm
cp lib/ExtUtils/MM_MacOS.pm blib/lib/ExtUtils/MM_MacOS.pm
cp lib/ExtUtils/MM_Any.pm blib/lib/ExtUtils/MM_Any.pm
cp lib/ExtUtils/MakeMaker/Locale.pm blib/lib/ExtUtils/MakeMaker/Locale.pm
cp lib/ExtUtils/MM_VOS.pm blib/lib/ExtUtils/MM_VOS.pm
cp lib/ExtUtils/MakeMaker/Config.pm blib/lib/ExtUtils/MakeMaker/Config.pm
cp inc/ExtUtils/MANIFEST.SKIP blib/lib/ExtUtils/MANIFEST.SKIP
cp lib/ExtUtils/MM_Unix.pm blib/lib/ExtUtils/MM_Unix.pm
cp lib/ExtUtils/MakeMaker/version/vpp.pm blib/lib/ExtUtils/MakeMaker/version/vpp.pm
cp lib/ExtUtils/testlib.pm blib/lib/ExtUtils/testlib.pm
cp lib/ExtUtils/MakeMaker/FAQ.pod blib/lib/ExtUtils/MakeMaker/FAQ.pod
cp lib/ExtUtils/Mkbootstrap.pm blib/lib/ExtUtils/Mkbootstrap.pm
cp lib/ExtUtils/MakeMaker/version/regex.pm blib/lib/ExtUtils/MakeMaker/version/regex.pm
cp lib/ExtUtils/MM_NW5.pm blib/lib/ExtUtils/MM_NW5.pm
cp inc/ExtUtils/Manifest.pm blib/lib/ExtUtils/Manifest.pm
cp lib/ExtUtils/MM_QNX.pm blib/lib/ExtUtils/MM_QNX.pm
cp lib/ExtUtils/MM_VMS.pm blib/lib/ExtUtils/MM_VMS.pm
cp lib/ExtUtils/MM.pm blib/lib/ExtUtils/MM.pm
cp lib/ExtUtils/MM_UWIN.pm blib/lib/ExtUtils/MM_UWIN.pm
cp lib/ExtUtils/MM_Cygwin.pm blib/lib/ExtUtils/MM_Cygwin.pm
cp inc/CPAN/Meta/Requirements.pm blib/lib/CPAN/Meta/Requirements.pm
cp inc/JSON/PP/Boolean.pm blib/lib/JSON/PP/Boolean.pm
cp lib/ExtUtils/MakeMaker/Tutorial.pod blib/lib/ExtUtils/MakeMaker/Tutorial.pod
cp bin/instmodsh blib/script/instmodsh
"/usr/bin/perl5.18.1" "-Iblib/arch" "-Iblib/lib" -MExtUtils::MY -e 'MY->fixin(shift)' -- blib/script/instmodsh
Manifying 1 pod document
Manifying 32 pod documents
PERL_DL_NONLAZY=1 "/usr/bin/perl5.18.1" "-Iblib/arch" "-Iblib/lib" "-MExtUtils::Command::MM" "-MTest::Harness" "-e" "undef *Test::Harness::Switches; test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00compile.t ............. ok     
t/01perl_bugs.t ........... ok   
t/arch_check.t ............ ok   
t/backwards.t ............. ok   
t/basic.t ................. ok       
t/build_man.t ............. ok   
t/cd.t .................... ok   
t/config.t ................ ok   
t/dir_target.t ............ ok   
t/echo.t .................. ok    
t/FIRST_MAKEFILE.t ........ ok   
t/fix_libs.t .............. ok   
t/fixin.t ................. ok     
t/hints.t ................. ok   
t/INST.t .................. ok     
t/INST_PREFIX.t ........... ok     
t/INSTALL_BASE.t .......... ok     
t/installed_file.t ........ ok   
t/is_of_type.t ............ ok    
t/Liblist.t ............... ok   
t/Liblist_Kid.t ........... 1/? Unrecognized argument in LIBS ignored: 'unreal_test'
Unrecognized argument in LIBS ignored: 'unreal_test'
t/Liblist_Kid.t ........... ok   
t/make.t .................. ok   
t/MakeMaker_Parameters.t .. ok   
t/maketext_filter.t ....... ok   
t/meta_convert.t .......... ok    
t/metafile_data.t ......... ok     
t/metafile_file.t ......... ok     
t/min_perl_version.t ...... ok     
t/miniperl.t .............. skipped: miniperl test only necessary for the perl core
t/Mkbootstrap.t ........... ok     
t/MM_Any.t ................ ok   
t/MM_BeOS.t ............... skipped: This is not BeOS
t/MM_Cygwin.t ............. skipped: This is not cygwin
t/MM_NW5.t ................ skipped: This is not NW5
t/MM_OS2.t ................ skipped: This is not OS/2
t/MM_Unix.t ............... ok       
t/MM_VMS.t ................ skipped: This is not VMS
t/MM_Win32.t .............. skipped: This is not Win32
t/oneliner.t .............. ok     
t/parse_abstract.t ........ ok   
t/parse_version.t ......... ok       
t/PL_FILES.t .............. ok   
t/pm.t .................... ok   
t/pm_to_blib.t ............ ok    
t/pod2man.t ............... ok   
t/postamble.t ............. ok   
t/prefixify.t ............. ok   
t/prereq.t ................ ok     
t/prereq_print.t .......... ok     
t/problems.t .............. ok   
t/prompt.t ................ ok     
t/recurs.t ................ ok     
t/revision.t .............. ok   
t/several_authors.t ....... ok     
t/split_command.t ......... ok   
t/test_boilerplate.t ...... ok   
t/testlib.t ............... ok   
t/unicode.t ............... ok   
t/VERSION_FROM.t .......... ok   
t/vstrings.t .............. ok    
t/WriteEmptyMakefile.t .... ok   
t/writemakefile_args.t .... ok     
t/xs.t .................... ok   
All tests successful.

Test Summary Report
-------------------
t/pm_to_blib.t          (Wstat: 0 Tests: 14 Failed: 0)
  TODO passed:   10-11
Files=63, Tests=1103, 66 wallclock secs ( 0.52 usr  0.10 sys + 49.71 cusr  5.51 csys = 55.84 CPU)
Result: PASS
Manifying 1 pod document
Manifying 32 pod documents
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/CPAN/Meta/Requirements.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Win95.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_VOS.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Win32.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_NW5.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_BeOS.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Unix.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/testlib.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_OS2.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Manifest.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Mksymlists.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_MacOS.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_VMS.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Liblist.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Cygwin.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Darwin.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_AIX.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Mkbootstrap.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_QNX.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MY.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MANIFEST.SKIP
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_UWIN.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_DOS.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MM_Any.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Command/MM.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Tutorial.pod
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/FAQ.pod
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Locale.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Config.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version/vpp.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version/regex.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/ExtUtils/Liblist/Kid.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/JSON/PP.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/perl5/vendor_perl/JSON/PP/Boolean.pm
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/share/man/man1/instmodsh.1
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MakeMaker::Tutorial.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MY.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Darwin.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Unix.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/JSON::PP.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::Liblist.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_MacOS.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MakeMaker.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/JSON::PP::Boolean.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_NW5.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::Manifest.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MakeMaker::Config.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::Mkbootstrap.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::Command::MM.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_VMS.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Any.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MakeMaker::FAQ.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_UWIN.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/CPAN::Meta::Requirements.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MakeMaker::Locale.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_AIX.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Win95.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_VOS.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_BeOS.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_DOS.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::testlib.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_OS2.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_QNX.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::Mksymlists.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Win32.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/man/man3/ExtUtils::MM_Cygwin.3
Installing /tmp/SBo/package-perl-extutils-makemaker/usr/bin/instmodsh
Appending installation info to /tmp/SBo/package-perl-extutils-makemaker/usr/lib/perl5/perllocal.pod

Slackware package maker, version 3.14159.

Searching for symbolic links:

No symbolic links were found, so we won't make an installation script.
You can make your own later in ./install/doinst.sh and rebuild the
package if you like.

This next step is optional - you can set the directories in your package
to some sane permissions. If any of the directories in your package have
special permissions, then DO NOT reset them here!

Would you like to reset all directory permissions to 755 (drwxr-xr-x) and
directory ownerships to root.root ([y]es, [n]o)? n

Creating Slackware package:  /tmp/perl-extutils-makemaker-7.04-i486-1_SBo.tgz

./
install/
install/slack-desc
usr/
usr/doc/
usr/doc/perl-extutils-makemaker-7.04/
usr/doc/perl-extutils-makemaker-7.04/Changes
usr/doc/perl-extutils-makemaker-7.04/README
usr/doc/perl-extutils-makemaker-7.04/perl-extutils-makemaker.SlackBuild
usr/man/
usr/man/man3/
usr/man/man3/CPAN::Meta::Requirements.3.gz
usr/man/man3/ExtUtils::MM_Cygwin.3.gz
usr/man/man3/ExtUtils::MM_Any.3.gz
usr/man/man3/ExtUtils::MM_Win95.3.gz
usr/man/man3/ExtUtils::MakeMaker::Locale.3.gz
usr/man/man3/ExtUtils::Manifest.3.gz
usr/man/man3/ExtUtils::Mkbootstrap.3.gz
usr/man/man3/ExtUtils::MakeMaker::Config.3.gz
usr/man/man3/ExtUtils::MM_VOS.3.gz
usr/man/man3/ExtUtils::MM_QNX.3.gz
usr/man/man3/ExtUtils::MakeMaker.3.gz
usr/man/man3/ExtUtils::MM.3.gz
usr/man/man3/ExtUtils::MM_Darwin.3.gz
usr/man/man3/ExtUtils::testlib.3.gz
usr/man/man3/ExtUtils::MM_AIX.3.gz
usr/man/man3/ExtUtils::MakeMaker::Tutorial.3.gz
usr/man/man3/ExtUtils::MM_Unix.3.gz
usr/man/man3/ExtUtils::MM_Win32.3.gz
usr/man/man3/JSON::PP.3.gz
usr/man/man3/ExtUtils::Mksymlists.3.gz
usr/man/man3/ExtUtils::MM_MacOS.3.gz
usr/man/man3/ExtUtils::Command::MM.3.gz
usr/man/man3/ExtUtils::MM_NW5.3.gz
usr/man/man3/ExtUtils::MM_UWIN.3.gz
usr/man/man3/ExtUtils::MM_VMS.3.gz
usr/man/man3/ExtUtils::MM_OS2.3.gz
usr/man/man3/JSON::PP::Boolean.3.gz
usr/man/man3/ExtUtils::MM_DOS.3.gz
usr/man/man3/ExtUtils::Liblist.3.gz
usr/man/man3/ExtUtils::MM_BeOS.3.gz
usr/man/man3/ExtUtils::MY.3.gz
usr/man/man3/ExtUtils::MakeMaker::FAQ.3.gz
usr/share/
usr/share/perl5/
usr/share/perl5/vendor_perl/
usr/share/perl5/vendor_perl/CPAN/
usr/share/perl5/vendor_perl/CPAN/Meta/
usr/share/perl5/vendor_perl/CPAN/Meta/Requirements.pm
usr/share/perl5/vendor_perl/ExtUtils/
usr/share/perl5/vendor_perl/ExtUtils/Command/
usr/share/perl5/vendor_perl/ExtUtils/Command/MM.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Win95.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_VOS.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Win32.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Tutorial.pod
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/FAQ.pod
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Locale.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/Config.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version/
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version/vpp.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version/regex.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker/version.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_NW5.pm
usr/share/perl5/vendor_perl/ExtUtils/MakeMaker.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_BeOS.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Unix.pm
usr/share/perl5/vendor_perl/ExtUtils/testlib.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_OS2.pm
usr/share/perl5/vendor_perl/ExtUtils/Manifest.pm
usr/share/perl5/vendor_perl/ExtUtils/Mksymlists.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_MacOS.pm
usr/share/perl5/vendor_perl/ExtUtils/MM.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_VMS.pm
usr/share/perl5/vendor_perl/ExtUtils/Liblist.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Cygwin.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Darwin.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_AIX.pm
usr/share/perl5/vendor_perl/ExtUtils/Liblist/
usr/share/perl5/vendor_perl/ExtUtils/Liblist/Kid.pm
usr/share/perl5/vendor_perl/ExtUtils/Mkbootstrap.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_QNX.pm
usr/share/perl5/vendor_perl/ExtUtils/MY.pm
usr/share/perl5/vendor_perl/ExtUtils/MANIFEST.SKIP
usr/share/perl5/vendor_perl/ExtUtils/MM_UWIN.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_DOS.pm
usr/share/perl5/vendor_perl/ExtUtils/MM_Any.pm
usr/share/perl5/vendor_perl/JSON/
usr/share/perl5/vendor_perl/JSON/PP/
usr/share/perl5/vendor_perl/JSON/PP/Boolean.pm
usr/share/perl5/vendor_perl/JSON/PP.pm
usr/share/man/
usr/share/man/man1/
usr/share/man/man1/instmodsh.1
usr/bin/
usr/bin/instmodsh
WARNING:  /usr/share/man (with possibly not gzipped man pages) detected

Slackware package /tmp/perl-extutils-makemaker-7.04-i486-1_SBo.tgz created.

+-[slackware][~/Downloads/perl-extutils-makemaker]
+-? sudo installpkg /tmp/perl-extutils-makemaker-7.04-i486-1_SBo.tgz
Verifying package perl-extutils-makemaker-7.04-i486-1_SBo.tgz.
Installing package perl-extutils-makemaker-7.04-i486-1_SBo.tgz:
PACKAGE DESCRIPTION:
# perl-extutils-makemaker (ExtUtils::MakeMaker - Create a module Makefile)
#
# This utility is designed to write a Makefile for an extension module 
# 
# from a Makefile.PL.
#
Package perl-extutils-makemaker-7.04-i486-1_SBo.tgz installed.

+-[slackware][~/Downloads/perl-extutils-makemaker]
+-? 

Então… de volta ao CPAN

E já que por causa dessas coisas veremos a instalação manual dos módulos citados:

$ su
# perl -MCPAN -e shell
cpan[1]> install File::BaseDir
cpan[2]> install File::DesktopEntry
cpan[3]> install File::MimeInfo
cpan[4]> exit
# exit
$ exit

Este slideshow necessita de JavaScript.

Configurando o obbrowser

Baixe os sources do programa via GIT e mova-o para /usr/local/bin:

$ git clone https://github.com/trizen/obbrowser
$ chmod +x obbrowser/obbrowser 
$ sudo mv -v obbrowser/obbrowser /usr/local/bin/

Daí habilite a linha correspondente ao obbrowser no arquivo ~/.config/obmenu-generator/schema.pl:

$ nano .config/obmenu-generator/schema.pl

Este slideshow necessita de JavaScript.

Observe que nas imagens o modelo está em pt_BR, no arquivo original consta apenas uma linha:

    #{pipe => ['obbrowser', 'Disk', 'drive-harddisk']},

Se fez tudo direitinho ao clicar na área de trabalho de seu OpenBox, verá algo parecido com isto:

OpenBox no Slackware com obmenu-generator & obbrowser
OpenBox no Slackware com obmenu-generator & obbrowser

Referência

HOW-TO :: OBMENU-GENERATOR NO SLACKWARE

IntÉ!

Anúncios
How-To :: obbrowser no Slackware

Deixe um comentário

Preencha os seus dados abaixo ou clique em um ícone para log in:

Logotipo do WordPress.com

Você está comentando utilizando sua conta WordPress.com. Sair /  Alterar )

Foto do Google+

Você está comentando utilizando sua conta Google+. Sair /  Alterar )

Imagem do Twitter

Você está comentando utilizando sua conta Twitter. Sair /  Alterar )

Foto do Facebook

Você está comentando utilizando sua conta Facebook. Sair /  Alterar )

Conectando a %s